WANGDA Machinery Factory
WANGDA MACHINERY FACTORY Rich Experience For Vacuum Extruder And Brick Setting Machine Complete Equipment
Add to Cart
JKY 60 / 60 - 4.0 Vacuum Brick Extruder Steel Alloy Reamer Soild Clay Brick Making Machine
Product Description
China clay red brick making machine is used to produce solid brick and hollow brick with great quantities of holes and large section in all size of holes style.it is also suitable for all kinds of materials.its features are novel structure,advanced technology,high extrusive pressure,high production and high vacuum degree.it adopts pneumatic clutch to control,sensitiveness,convenient,reliable
1. High technology,
2. Easy operation,
3. Large output,
4. Low-power motors,
5. Reasonable price
Product Advantage
1. This machine is clay column molding equipment for brick production line.
2. This machine has the features of high extrusion pressure, strong loading capability, high quality of green brick column and widely using, etc.
3. This machine is suitable for clay, shale, etc as the main raw material to produce all kinds of vacuum solid brick, bearing and non-bearing hollow bricks.
4. This machines "T" type double stage vacuum structure, (It can be customized according to user's site) with advantage of easy operation, smooth running, high security and reliability.This machine is divided into upper mixing extruding system and bottom extruding molding system.
Technical Parameter
Type | Production Capacity | Moisture Content | Reamer Diameter(mm) | Allowable Pressure(Mpa) | Vacuum Degree(Mpa) | Motor Power(kw) |
| JKY70/60-4.0 | | | | | | Upper:Y6-90 |
| Lower:Y6-250 | ||||||
| | | | | | Upper:Y6-90 |
| Lower:Y6-250 |
Operation and Precautions of JKY 60/60 - 4.0 brick machine :
1. This jky 60/60-40 brick machine opening, core head, core rod should be replaced and adjusted in time. While they are abraded to some extent, the sizes of tile will be affected in clay brick production line.
2. The wearing parts should be repaired and replaced when they are abraded after a period of use, or the product quality and output will decline, such as reamers, stirring blades and mud pressing board.
3. When you want to stop the machine, stop feeding first, and then squeeze out the clay inside the machine, in order to avoid the overload at next startup. Don't reboot the machine if the air pressure is lower than 0.5MMpa. The friction plate is easily burnt if the air pressure is not enough in clay brick production line.
4. The clay brick machine and all the bolts should be stopped and checked after six to eight hours' work for the first time to make sure if there is looseness. If yes, fasten them in time. If the machine is stopped for more than one day, all the clay material should be squeezed and cleaned out, trying to avoid the damage by the dry clay.
Maintenance and Repair:
JKY 60/60 - 4.0 brick machine should be in good water lubrication condition so the machine is enabled to obtain the maximum efficiency and prolong the service life.
Spindle speed reducer is lubricated by an oil pump filled with N150 (GB/T3141) lubricating oil. The better refueling position is between the two scales of oil dipstick. The other parts are lubricated by 3#extreme pressure lithium-based grease (GB7324-94).
The filled lubricating oil has to be replaced after 300 to 600 hours at the very start, and then it can be replaced after 1500 to 5000 hours. The lubricating grease has to be filled regularly.
Packaging & Shipping
Our payment terms:
1. We usually accept T.T, or Cash, or L/C, 30% for down payment, 70% pay as balance before loading.
2. It is about 45 days to finish all the machines after receive the down payment.
3. We take pictures and videos of finished products, and test all the machines before delivery.
Packaging of our machines:
1. Each small part of machine would be packed well, also we would arrange engineer to check each machine parts before delivery, so we can ensure buyer can get complete clay brick machine parts. .
2. Some parts will be given soft protection before feeding in the container to make sure all the machine will be new when arriving at customer hand.
Delivery of our machines:
1. We have been long term cooperation with many famous shipping agent. Also we can arrange the shipment as your needs.
2. After we get the B/L we will send it to you together with the Sales Contract, Invoice, Packaging List, etc.
Product Show
We are at the fair
Our delivery site
Our workshop