WANGDA Machinery Factory
WANGDA MACHINERY FACTORY Rich Experience For Vacuum Extruder And Brick Setting Machine Complete Equipment
Add to Cart
Hydraulic Press Clay Brick Production Line With Three Same Size Oil Cylinder
Clay Brick Production LineDescription
1. Clay Brick Production Line is a new tape of block making machine ,it can produce more brick than normal manaul
block machine.
2. Hydraulic mould vibration make the fianl brick more stength and density.
3. Hydraulic systerm make the machine run smooth and steady .
4. Hydraulic block machine can not only make hollow bricks ,it can also make solid and paver.
Clay Brick Production Line Main feature
1). Automatic block production lines, includees a cluster cars, steam curing cellar of block production line , are of high degree of automation .It can bring the fully-automated production process of batch charging, stir forming , transmission and curing, palletizing and packing into practice.
2). Our machine have passed Europe CE and ISO9001 standard.we use Germany SIEMENS motors,Japanese MITSUBISHI PLC control system
3). Use three same size oil cylinder,will work at the same time,to insure the same density and high quality of the blocks.
4). Use 360°revoling method to make the material more uniform.
5). Use the heat treatment technial to deal with the mould,so the useful life of the mould is more longer.
Clay Brick Production Line Technial Parameters
| Type | Measuring Unit | JZK50/50-3.5 | JZK45/45-3.5 | JZK55/55-4.0 | JZK60/60-4.0 | JZK70/60-4.0 |
| Production Capacity | Pcs/h | 12000-16000 | 10000-13000 | 16000-20000 | 16000-22000 | 18000-22000 |
| Moisture Content | Percentage | 18-20% | 18-20% | 16-20% | 16-18% | 16-18% |
| Reamer Diameter | mm | 500 | 450 | 550 | 600 | 700-600 |
| Motor Power | Kw | Upper:Y250M-4-55Kw | Upper: Y225M-4-45Kw | Upper: Y250M-6-75Kw | Upper: Y6-75Kw | Upper: Y6-75Kw |
| Lower:Y315S-6-160 | Lower : Y280S-4-132KW | Lower: Y315S-6-185Kw | Lower: Y6-250Kw | Lower: Y6-250 |
Whole brick making process
1. Material is put into box feeder to make sure continuous feeding.There is a reamer near the discharging
hole of box feeder.It can crash big block.
2. Then material is conveyed to roller crusher and crashed into powdery.
3. After that material is conveyed to double shaft mixer.Add water when mixing the material to make it more even.
4. Material is conveyed to brick vacuum extruder.The machine process the material and squeezes out mud strip.
5. Strip cutter cut the mud strip into equal length strip and convey them to cut adobe plate.
6. Adobe cutter cut the brick strip into green brick adobes.
7. Green bricks pass stoving and sintering processes become red brick.
Clay Brick Production Line show
